[Skip to content]

Intertraffic World Highways ITS International
Intertraffic World Highways ITS International
Intertraffic World Highways ITS International
Search our Site

Daily Video

Video Sponsored by gif banner Swarco and Lindsay
Click here to see all Daily Videos
22 March 2018

 

RSS

Cestel showcases non-invasive WIM solution for bridges

First publishedIntertraffic
2018
Daily News
Day 3
Cestel says its MkIII SiWIM technology turns any bridge into a fully automatic weigh-in-motion system without disturbing the road surface.

Sensors are fixed to the underside of the bridge deck beneath up to four lanes of traffic and the system is calibrated with vehicles of known weight passing individually, in opposite directions and in various combinations depending on the road layout. Having been calibrated, an algorithm then interprets the information to determine the number, weights, speed and direction of passing vehicles and the cumulative load on the bridge deck.

The system can be configured with or without cameras and is said to be easily relocated from one bridge to another (only requiring re-calibration).

Measured gross vehicle weights (above 3.5t) are said to be within 7%, individual axles within 11% and group axles within 10%. Speed measurement are within 2% and vehicles can be divided into an unlimited number of categories.

Stand: 12.614

www.siwim.com

Companies in this article

Registration
Exhibitors List
Conference
Platinum Sponsors
Siemens Web bannerJenoptik Logo 295 x 110Tattile Logo 295 x 110CA Traffic banner 295 x 110Flir 295 x 110 Vitronic banner 295 x 110Lindsay 295 x 110Kapsch 295x110 12 px borderSwarco 295 x 110 Dynniq logo 295 x 110 bannerRedflex LogoIteris banner 295 x 110
Platinum Sponsors
3M 295 x 110.jpgVitronic banner 295 x 110Lindsay 295 x 110Flir 295 x 110 ADH1_Red_1797_295x110.jpgSwarco Logo