[Skip to content]

Vision Route One Publishing LTD
Route One Publishing LTD Vision
Route One Publishing LTD Vision
29 October 2014

 

RSS

Multi-camera plug and play from Tattille

First publishedVision
2014
[ Zoom ]
Tattile Muti Camera - M100GigE
M100GigE

Tattile’s M100 multi-camera vision controllers are plug and play industrial PCs specially designed, developed and manufactured by Tattile for use with vision systems. The fan Less systems require minimum maintenance and are guaranteed for ten years

The M100 GigE multi-camera vision controller has six GigE ports which can be connected to Tattile’s or other compatible manufacturers’ cameras. Up to four USB3.0 cameras may be connected, providing the user with a wide range of applications.

All ports are independent, each with its own direct connection to the CPU and all are Power over Ethernet (PoE), allowing the cameras to be powered directly through the Ethernet cable connection without the need for extra power cables.

The M100 CameraLink multicamera vision controller has four camera link ports that can be connected to Tattile’s or other manufacturers’ cameras, providing maximum flexibility for users.

[ Zoom ]
Tattile M100 Camera Link
M100 Camera Link

It supports base, medium, full and Deca protocols; up to four cameras can be connected in base mode or two in other modes.

All ports are directly connected to an FPGA of 160K logic elements that manage the image acquisition and preprocessing; users are able to easily and independently programme it via graphical software.

All ports are Power over Camera Link (PoCL), requiring only one cable for power supply, data and image transmission. In addition, two USB3.0 cameras may be connected.

Both systems utilise the latest generation Intel processors (i3 or i7, depending on the user’s requirements) and Windows Embedded Standard 7 (WES7) or Linux operating systems.

Open architecture design allows the user to develop vision applications using Tattile’s software platform or other manufacturers’ software libraries or to use a previously developed programme.

Hall 1, Stand C63
Teledyne Dalsa 295 x 110 Basler 295 x 110 Lumenera 295 x 110Tattile 295 x 110